BROTHER GTXPRO: MADE FOR YOU
The new GTXpro from Brother: Flexible and immensely versatile. Offering all functions for mass production, the new DTG printer is now suitable for everybody.
Easy printing on a variety of garments like shoes, caps and more. Besides, you can print on cotton, silk and polyester, all with the same ink.
Eco Friendly Inks
GTX printer inks are manufactured according to Brother’s exclusive formulation to provide the best possible results.
Experience the ultimate image quality and high volume production with the Brother GTX Pro, whatever your level of expertise.
The Innobella Textile inks have been tested by the AATCC to provide a washability of 4.0 or greater.
Any Enquiries or Free Demo?
EASY TO USE
No need for a complicated rip, Graphics Lab comes standard with every GTX Pro. Easy and simple to use whilst providing maximum control over your designs. Just place, position and print. It’s that easy (GTX Pro machines are still compatible with third party rip software).
Need to print just a few more of a certain design but haven’t got the artwork to hand? No problem, the GTX Pro stores approximately 100 designs thanks to it’s on-board memory system, so all your latest printed designs are available at the touch of a button.
Direct inkjet garment printer
Number of Ink-Heads
2 print heads / 8 ink channels
1400mm x 1300mm x 550mm
1200 dpi x 1200 dpi
Water-based pigment ink
appox. 120kg including platen
Printer driver (USB, File output)
On demand piezo head
AC 110V-240V, 50/60Hz +- 1HZ
XGA(1024×768) (minimum recommendation)
Max Print Size is 40,6cm x 53,3cm / 16” x 21”
Included Platen Size
35,6cm x 40,6cm / 14” x 16”
macOS 10.14 Mojave, macOS 10.15 Catalina Windows 8.1 (64bit), Windows 10 (64bit)
0.8A(average) (Reference: 0.4A – during circulation)
Single or double for CMYK. Underbase and highlight for white
Driver operating conditions
2GHz CPU (minimum recommendation) 4GB RAM (minimum recommendation)
Adobe® Photoshop CS6/CC, Adobe ® Illustrator CS6/CC, CorelDRAW ® 2018/2019 (Windows)
Standby Conditions: 10°C-35°C, 20%-85% Operating onditions: 18°C-30°C, 35%-85%
Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer’s instructions. Pre-treatment is necessary for white ink.
Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320° (160°) for three and a half minutes. Time and temperature may vary depending on which manufacturer’s dryer is used.
USB2.0, LAN(10BASE-T, 100BASE-TX, 1000BASE-T), USB Flash Memory (Under 32GB, FAT32 format)