GET NEW LOWER PRICING ON BULK INKS
18L WHITE INK CONTAINERS as low as RM0.56/cc
Save ink, save time and now save more money with new bulk ink pricing for your GTXpro B direct to garment printer. Engineered specifically for high-volume print shops that run multiple shifts, these large ink containers work ideally with Brother’s intelligent ink system to keep ink in a constant state of motion, so you get less waste and more uptime.
PRINT UP TO 42 DARK GARMENTS PER HOUR
(11″ x 11″ design at 1200 x 1200 dpi in CMYK+White in High Speed Print Mode)
PRINT UP TO 57 LIGHT GARMENTS PER HOUR
(11″ x 11″ design at 1200 x 1200 dpi in Standard CMYK Only Mode)
LESS IS MORE!
LESS IS PRO!
INTERNAL CIRCULATION & FAST MODE
New industrial white print head design allows for internal ink circulation inside the print head as well as throughout the machine, greatly reducing white ink wastage. A new ‘fast mode’ may now be enabled on your GTX Pro Bulk, cutting print times by 10% whilst maintaining 1200dpi print quality.
LESS WAITING & MORE PRINTING
Thanks to the new industrial print head design, further automation of maintenance procedures means no more need for morning preparation. The new cap design leads to a considerably shorter purging time and the larger color sub-tanks are now refilled during the printing process, all resulting in more time spent printing.
The new re-designed maintenance unit allows for the removal of unecessary cleaning procedures. It simplifies the replacement of expendable parts by making them easier to access by the operator. Using smaller flushing foams reduces the ecological footprint of manufacturing Brother, making this a great eco-friendly machine.
CERTIFIED INKS & ECO FRIENDLY
The inks are manufactured according to Brother’s exclusive formulation to provide the best possible results. These DTG inks are amongst the first to not only carry the Oeko-Tex® Certification, but also to be GOTS APPROVED and CPSIA compliant* to help ensure they are safe for printing and environmentally responsible.
Eco Friendly Inks
Direct inkjet garment printer
Number of Ink-Heads
2 print heads / 8 ink channels
1780mm x 1300mm x 1210mm
1200 dpi x 1200 dpi
Water-based pigment ink
appox. 165kg including platen
Printer driver (USB, File output)
On demand piezo head
AC 110V-240V, 50/60Hz +- 1HZ
XGA(1024×768) (minimum recommendation)
Max Print Size is 40,6cm x 53,3cm / 16” x 21”
Included Platen Size
35,6cm x 40,6cm / 14” x 16”
macOS 10.14 Mojave, macOS 10.15 Catalina Windows 8.1 (64bit), Windows 10 (64bit)
0.8A(average) (Reference: 0.4A – during circulation)
Single or double for CMYK. Underbase and highlight for white
Driver operating conditions
2GHz CPU (minimum recommendation) 4GB RAM (minimum recommendation)
Adobe® Photoshop CS6/CC, Adobe ® Illustrator CS6/CC, CorelDRAW ® 2018/2019 (Windows)
Standby Conditions: 10°C-35°C, 20%-85% Operating onditions: 18°C-30°C, 35%-85%
Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer’s instructions. Pre-treatment is necessary for white ink.
Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320° (160°) for three and a half minutes. Time and temperature may vary depending on which manufacturer’s dryer is used.
USB2.0, LAN(10BASE-T, 100BASE-TX, 1000BASE-T), USB Flash Memory (Under 32GB, FAT32 format)